Predám Základnú Doska Gigabyte am3+

Základná Doska
Gigabyte GA-970A-DS3P

GA-970A-DS3P FX (rev. 2.1)

Specification

CPU

AM3+ Socket:

AMD AM3+ FX processors

AMD AM3 Phenom™ II processor/ AMD Athlon™ II processor

(Please refer "CPU Support List" for more information.)

Hyper Transport Bus

HyperTransport™ 3.0

Support up to 5200 MT/s

Chipset

North Bridge: AMD 990FX

South Bridge: AMD SB950

Memory

4 x DDR3 DIMM sockets supporting up to 64 GB of system memory*
* Due to a Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than the size of the physical memory installed.
** Using a AM3+ CPU for up to 64GB of system memory support.

Dual channel memory architecture

Support for DDR3 2000(O.C.)/1866/1600/1333/1066 MHz memory modules*
* To support a DDR3 1866 MHz (and above) memory, you must install an AM3+ CPU first.

(Please refer "Memory Support List" for more information.)

Audio

Realtek® ALC887 audio codec

High Definition Audio

2/4/5.1/7.1-channel
* To configure 7.1-channel audio, you have to use an HD front panel audio module and enable the multi-channel audio feature through the audio driver

Support for S/PDIF Out

LAN

Realtek® GbE LAN chip (10/100/1000 Mbit)

Expansion Slots

1 x PCI Express x16 slot, running at x16 (PCIEX16)
* For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot.

1 x PCI Express x16 slot, running at x4 (PCIEX4)

3 x PCI Express x1 slots
(All PCI Express slots conform to PCI Express 2.0 standard.)

2 x PCI slots

Storage Interface

South Bridge:

6 x SATA 6Gb/s connectors

Support for RAID 0, RAID 1, RAID 5, RAID 10, and JBOD

USB

South Bridge:

12 x USB 2.0/1.1 ports (6 ports on the back panel, 6 ports available through the internal USB headers)

VIA® VL805 chip:

4 x USB 3.1 Gen 1 ports (2 ports on the back panel, 2 ports available through the internal USB header)

Internal I/O Connectors

1 x 24-pin ATX main power connector

1 x 4-pin ATX 12V power connector

6 x SATA 6Gb/s connectors

1 x CPU fan header

2 x system fan headers

1 x power fan header

1 x front panel header

1 x front panel audio header

1 x S/PDIF Out header

1 x USB 3.1 Gen 1 header

3 x USB 2.0/1.1 headers

1 x Clear CMOS jumper

Back Panel Connectors

1 x PS/2 keyboard port

1 x PS/2 mouse port

2 x USB 3.1 Gen 1 ports

6 x USB 2.0/1.1 ports

1 x RJ-45 port

3 x audio jacks (Line In/Line Out/Microphone)

I/O Controller

iTE® I/O Controller Chip

H/W Monitoring

System voltage detection

CPU/System temperature detection

CPU/System/Power fan speed detection

CPU overheating warning

CPU/System/Power fan fail warning

CPU/System fan speed control*
* Whether the fan speed control function is supported will depend on the cooler you install.

BIOS

2 x 32 Mbit flash

Us